English - LIMIT 4000 Handbuch

Rubber Hardness Tester LIMIT 4000
General information
Limit 4000 is designed to determine hardness of soft
material as rubber, neoprene, silicon, vinyl etc.
A spring loaded probe are hold against the specimen
and the Shore A value shows on the display.
The specimen surface should be flat and the instrument
foot parallel to the specimen. The measurment area
must be at least 12 mm diameter and distance to any
edge at least 12 mm.
Specification
Range
Min specimen thickness
Accuracy
Automatic off
Operation temerature
Humidity
Battery
Weight
The instrumentet meet standard as DIN 53505, ISO 868,
ASTM D 2240.
Operation
1. On or manuell OFF. Push the Ө-button.
2. Push the MAX-button. MAX shows on the display.
0 – 100 Shore A
After 1 minute
0 – 80 % RH
4 pcs 1,5V type AAA
2

English

6 mm
+ 1 %
0 – 50 ºC
170 g