Calibration Certificate - PCL QUBE Benutzerhandbuch

Calibration Certificate

Each unit, before release, is checked and calibrated on test equipment that has accuracy
The Druck unit is referenced to Certificate 0029346 issued by UKAS Laboratory No. 0221.
This accuracy exceeds EC Directive 86/217/EC and BS EN 12645:2014 (MPE = 0.08 bar).
READING
1
2
PART NUMBER
SERIAL NUMBER
TESTED BY
DATE
This Equipment also complies with the EC directives:
•
89/336/EEC (EMC directive) confirmed by report No.10462/TR/1
•
73/23/EEC (LOW Voltage Directive) as amended by 93/68/EEC
Accordance with IEC/EN 61010-1:2001 confirmed by report No. TTR-004115-18-00
Emission: EN 61000-6-3:2007 Electromagnetic compatibility Generic standards
EN 55016-2-3:2006; EN 55016-2-1:2004; EN 55014-1:2006
EN 61000-3-2:2006; EN 61000-3-3:1995 +A1+A2
Immunity: EN61000-4-2:1995+A1+A2:2001; EN61000-4-4:2004; EN61000-4-5:2006
EN61000-4-6:1996+A1:2001; EN61000-4-11:2004
EN61000-4-8:1993+A1:2001
traceable to Druck pressure indicator S/N2329290.
SET PRESSURE
BAR
BAR
PSI
PSI
ACTUAL
PRESSURE
KPA
KPA