Important Safeguards - Sinbo SSI 2860 Gebrauchsanweisung

ENGLISH
SINBO SSI 2860, SSI 2861 STEAM IRON
INSTRUCTION MANUAL
PLEASE SAVE THESE INSTRUCTIONS

IMPORTANT SAFEGUARDS

When using your iron, basic safety precautions should always be followed , including the
following:
Read all instructions before using
1. Use the iron only for its intended use.
2. To protect against the risk of electric shock, do not immerse the iron in water or other
liquids.
3. The iron should always be turned to "min" before plugging or unplugging from the
mains outlet. Never pull the cord to disconnect from the mains: instead, grasp plug and
pull to disconnect.
4. Do not allow the cord to touch hot surfaces. Allow the iron to cool completely before
putting away.
5. Always disconnect the iron from the electrical outlet when filling with water or emptying
and when not in use
6. Do not operate the iron with a damaged cord or if the iron has been dropped or
damaged. To avoid the risk of electric shock, do not disassemble the iron .take it to a
qualified service agent for examination and repair. Incorrect re-assembly, can cause a
risk of electric shock when the iron is used.
7. Close supervision is necessary for any appliance being used by or near children. Do
not leave the iron unattended when connected to the mains or on an ironing board.
8. Burns can occur from torching hot metal parts, hot water or steam, use caution when
you turn a steam iron upside down-there may be hot water in the reservoir.
9. If the iron is not operating normally ,disconnect from the power supply. And contact
the nearest authorized service agent.
10. Your iron is designed to rest on the heel. Do not leave the iron unattended when
switched on. Do not place the iron on an unprotected surface even if it is on its heel rest.
KNOW YOUR STEAM/SPRAY/DRY IRON
1. Hander
2. Steam Button
3. Cord Entry Protection
4. Power Cord
5. Pilot
6. Water Tank
7. Heel Rest
8. Temperature Control Dial
9. Soleplate
10. Spray Nozzle (SSI 2861)
11. Spray Button (SSI 2861)
- 7 -