Werbung
Quicklinks
Manual
Manuale / Manuel / Betriebsanleitung / Manuál / Navodila / Priručnik / Uputstvo / Használati utasítás / Instrukcja
ZNO2047400 PrC
FlexiTech Safety Escape
CGLine+
228 mm
1
a
0 V
1
2
c
Drill in the honeycomb zones (IP43) or in
the flexible material (IP65/IP43).
11/2019
+ Web-Controller CGLine+
31,2 mm
b
Break through a cable
entry using a screwdriver.
1
D
LiFePO
White flexible material
A
Blue flexible material
2,5 mm
Min. 5cm
C
!
Drilling zones to avoid
Honeycomb zones:
+ 45°C
+ 5°C
Before use
B
24h
Ref. 40071352379
F - 1600g
x2
Ø 5 mm
If cable entry on the
right
Rigid or flexible wire
2,5 < Ø < 13,5 mm
2
IP65
Werbung
Verwandte Anleitungen für Eaton FLEXITECH ESCAPE CGLINE+
Inhaltszusammenfassung für Eaton FLEXITECH ESCAPE CGLINE+
- Seite 1 Manual Manuale / Manuel / Betriebsanleitung / Manuál / Navodila / Priručnik / Uputstvo / Használati utasítás / Instrukcja ZNO2047400 PrC 11/2019 FlexiTech Safety Escape + 45°C CGLine+ + 5°C LiFePO + Web-Controller CGLine+ Before use White flexible material Blue flexible material Ref.
- Seite 2 75 lm 60 lm 150 lm 100 lm xx lm 200 lm 150 lm 125 lm 300 lm xx lm 1,5h 300 lm 200 lm 400 lm 600 lm xx lm xx lm FLEXITECH ESCAPE CGLINE+ ZNO2047400 PrC 11/2019 www.eaton.com...
- Seite 3 Yellow 0,5 s. Constant Blinking Disconnect the battery, wait for 10 seconds, and reconnect it if you decide to change configuration (steps 2-3). See CGLine+ Web-Controller (and variants) user manuals. CLICK 230 V FLEXITECH ESCAPE CGLLINE+ ZNO2047400 PrC 11/2019 www.eaton.com...
- Seite 4 WEEE: Contact your local dealer EMEA Headquarters Eaton.com/recycling Route de la Longeraie 7 ZNO2047400 PrC- 11/2019 1110 Morges, Switzerland Eaton.eu Eaton is a registered trademark. © 2019 Eaton All trademarks are property 100 % All Rights Reserved of their respective owners.
- Seite 5 - Break through a cable entry using a - Drill in the honeycomb zones - White flexible material screwdriver. (IP43) or in the flexible material Before use - Rigid or flexible wire (IP65/IP43). - Blue flexible material - If cable entry on the right - Drilling zones to avoid - Percer l’entrée de câble avec un tournevis - Visser dans le nid d’abeille (IP43) ou...
- Seite 6 - Cabling of connectors with a screwdriver. - Even/ Odd - See user manuals - Cabling of connectors by hand. - Duration Test Day D - Installation date - Non-maintained - Battery - Duration Test Day postponed - Check the packaging for the whole - Maintained by 7 days cabling details.
- Seite 7 - Disconnect the battery, wait for - Magnet Test - Replaceable - Autotest - LED Description 10 seconds, and reconnect it if - Functional Test - Not replaceable - Charge / Lamp / - Green / Yellow you decide to change configura- - Duration Test - Battery pack, Order code Battery...