Yealink CPW90 Handbuch Seite 6

E
When you charge the CPW90, the CPW90 will start up automatically.
N
If you do not charge the CPW90, long tap the mute button on the CPW90
G
L
for 3 seconds to turn on the CPW90.
I
S
H
Note: If it is the first time you use the CPW90, you need to fully charge the
CPW90 for normal use.
If the CPW90 is not in use, we recommend you to charge the CPW90
even when the battery is full.
Registering the CPW90 with the CP960 Conference Phone
If you buy CP960-WirelessMic, the CPW90 is registered with the CP960
conference phone by default. In this situation, you can skip this chapter.
If the CPW90 is not registered with the CP960 conference phone, you
should register the CPW90 with the CP960 conference phone manually. So
that the CPW90 can work as expansion microphone of the CP960
conference phone.
To register the CPW90 with the CP960 conference phone:
1. Do the following on the CP960 conference phone:
Tap ->Wireless Microphone.
Tap to search for a CPW90.
2. Turn on the CPW90.
The CPW90 enters the registration mode automatically. And the mute
indicator LED on the CPW90 fast flashes yellow.
The CPW90 registers with the CP960 conference phone automatically.
If the registration is successful, the mute indicator LED on the CPW90
goes out and the touch screen of CP960 conference phone prompts the
CPW90 information: battery, work time and standby time.
Note: You can connect up to two wireless expansion microphones to a
CP960 conference phone.
LED Instruction
There are two indicators on the CPW90. The indicators display the CPW90
work status.
2