XtremeMac MicroPack Bedienungsanleitung Seite 6

MicroPack_manual.qxd
ENGLISH
LED Status Light
MicroPack tells you the charge status of its
battery and/or the battery in your iPod with
an LED near the back of the unit.
Status in
Dock mode...
MicroPack is
fully charged
iPod is
charging
MicroPack is
charging
Note: When you place your iPod in MicroPack while connected
to a charging source, the LED will blink red and blue for a few
moments while it determines whether it needs to charge the
iPod or the MicroPack.
10
Downloaded from www.Manualslib.com
9/13/06
Status in
LED Display Battery mode...
Solid Blue -
Blinking Red MicroPack needs
charging
Blinking Blue MicroPack
power is on
manuals search engine
1:03 AM Page 10
Power & Charging Information
Charging Priority
In Dock mode, MicroPack charges the iPod
battery first. Once the iPod's battery is fully
charged, MicroPack charges it's own internal
battery until fully charged.
iPod Battery
Don't let your iPod battery drain completely.
When you fully drain your iPod and plug it in
to any power source, the icon with the light-
ning bolt over a battery appears. This means
that your iPod does not have enough charge
to power up. MicroPack needs an active signal
from the iPod to see that your iPod is docked.
When the iPod's battery is fully drained, it
can't send that signal to MicroPack and
MicroPack in turn cannot power your iPod.
The remedy for this is to partially charge your
iPod, which may take up to 30 minutes as is
standard when charging a fully discharged
iPod battery.
ENGLISH
11