XtremeMac MicroPack Bedienungsanleitung Seite 4

MicroPack_manual.qxd
ENGLISH
Overview
6
Downloaded from www.Manualslib.com
9/13/06
1. Headphone 1 volume control
2. Headphone 2 volume control
3. Universal Dock well
4. Headphone 1 jack
5. Headphone 2 jack
6. Power switch
7. Dock connector port
8. Audio/Video line out port
manuals search engine
1:03 AM Page 6
BEFORE USING MICROPACK
MicroPack comes packaged only partly
charged. While usable, we STRONGLY rec-
ommend fully charging it before using with
your iPod as a battery pack.
To Charge:
1. Turn MicroPack on.
2. Plug a dock connector cable* into
MicroPack.
3. Plug the USB/FireWire end of the cable
into a computer or iPod power adapter*.
4. With the computer turned on or the power
adapter plugged into an electrical outlet,
charge MicroPack until the LED goes from
blinking blue to a solid blue (which takes
approximately 8-10 hours).
*Not included with MicroPack.
ENGLISH
IMPORTANT:
CHARGE!
7