Operation - Autosteady System - Enduro BC101 Bedienungsanleitung

OPERATION – AUTOSTEADY SYSTEM
Please make sure you read the safety instructions very
carefully and make sure that you follow these guidelines!
For the general use and guidelines of the autoSteady system,
please check the main user manual of your EN
autoSteady system.
Turn on the battery power isolation switch of the autoSteady system.
Start the APP, select the autoSteady system and the operating screen will
be entered.
Fig. 11
A. Up button & icon: press this button to draw-back the steadies. Once
this button is selected, the button will illuminate red. After this the
automatic or single function button can be pressed to draw-back the
corner steadies.
B. Down button & icon: press this button to lower the steadies. Once
this button is selected, the button will illuminate red. After this the
automatic or single function button can be pressed to lower the corner
steadies.
C. Automatic function button& icon: press this button to control all
steadies automatically up or down. Once this button is selected, the
button will illuminate red. Choose the "UP" or "DOWN" button first.
D. Left-front single corner steady function button: adjust Left-front
corner steady draw back or lower by pressing the button. Choose the
"UP" or "DOWN" button first.
E. Right-front single corner steady function button: adjust Right-
front corner steady draw back or lower by keep pushing the button.
Choose the "UP" or "DOWN" button first.
F. Left-back single corner steady function button: adjust Left-back
corner steady draw back or lower by pressing the button. Choose the
"UP" or "DOWN" button first.
G. Right-back single corner steady function button: adjust Right-
back corner steady draw back or lower by keep pushing the button.
Choose the "UP" or "DOWN" button first.
H. Information button: go to the APP user manual
I. Bluetooth icon: reflects status of the smartphone and caravan
autoSteady system communication
J. Voltmeter button: go to full screen voltmeter
K. Battery voltage icon: caravan battery voltage too high
L. Battery voltage icon: caravan battery voltage too low
M. Overload icon: Amp overload protection is activated. Wait about 60
seconds and try again
®
EN BC101 28
DURO
®
DURO
Ref: BC101-UM-TKI-0417-Rev.A.