Sound Menu - TechLine TL-32LC740 Bedienungsanleitung

mode settings, which are optimized for better video
quality, will be loaded.
Also; Picture Mode, Contrast, Brightness, Sharpness,
Colour and Colour Temp settings will be invisible and
disabled while Game Mode is on.
Note :
Picture mode selection button on the remote control will have
no function while Game Mode is on.
Picture Zoom
Select Picture Zoom by pressing " " or " " button.
Use " " or " " buttons, to change picture zoom to
Auto , 16:9 , 4:3 , Panoramic , 14:9 , Cinema , Subtitle
or Zoom .
Store
Press " " or " " button to select Store. Press " "
or OK button to store the settings. " Stored... " will be
displayed on the screen.
Reset
Press " " or " " button to select Reset . Press
" " or " " or OK button to reset the picture modes to
factory default settings.

Sound Menu

Volume
Press " " or " " button to select Volume . Press " "
or " " button to change the level of the Volume.
Equalizer
Press " " or " " button to select Equalizer . Press "
" button to view equalizer menu.
Press " " or " " button to change the preset. In
equalizer menu, the preset can be changed to Music ,
Movie , Speech , Flat , Classic and User .
Select the desired frequency by pressing " " or " "
button and increase or decrease the frequency gain
by pressing " " or " " button.
Press the " M " button to return to the previous menu.
Note : Equalizer menu settings can be changed only when
the Equalizer Mode is in User .
Balance
This setting is used for emphasizing left or right
speaker balance.
Press " " or " " button to select Balance. Press "
" or " " button to change the level of the balance.
Balance level can be adjusted between -32 and +
32.
Headphone
Press " " or " " button to select Headphone . Press
" " button to view the headphone menu.
Headphone sub-menu options are described below:
Volume
Press " " or " " button to select Volume . Press "
" button to increase headphone volume level. Press
" " button to decrease headphone volume level.
Headphone volume level can be adjusted between
0 and 63 .
Sound Mode
Press " " or " " button to select Sound Mode . Using
" " or " " button, you can select Mono, Stereo, Dual I
or Dual II mode, only if the selected channel supports
that mode.
AVL
Automatic Volume Limiting (AVL) function adjusts the
sound to obtain  xed output level between programmes
(For instance, volume level of advertisements tend to
be louder than programmes).
Press " " or " " button to select AVL . Press " " or
" " button to set the AVL as On or Off .
English - 51 -