Maintenance - OHAUS Ionizer ION-100A Handbuch

EN-6

4. MAINTENANCE

CAUTION: Turn Off the ionizer with the switch and disconnect the AC adapter
before starting any maintenance work.
Do not allow liquids to enter the housing.
4.1 Cleaning
Clean the electrode pins using alcohol and cotton swabs as shown below.
Clean the housing using a soft cloth, dampened with water and a mild detergent.
Attention: Do not use harsh chemicals to clean the balance, as the finish may be damaged.
4.2 Replacing the Electrode Pins
Using needle nose pliers, grip the electrode pin and pull it out of the socket. Gently push the
new electrode pin into the socket until it is fully inserted in the socket. Replacement electrode
pins can be ordered from OHAUS, please see below for information.
Accessories:
SP Electrode pins, ION-100A
Figure 4-1. Cleaning the electrode pins
Figure 4-2. Replacing the electrode pins
PN: 30133391
Ionizer 100A