Edimax ES-3108P Schnellinstallationsanleitung Seite 5

Trouble Shooting
1. Power LED is not lit
2. Link/Activity is not lit when connect to 100Mbps device
[!] Contact your dealer if problem persist.
Downloaded from www.Manualslib.com
Check if the power cord is properly connected to the
external power adapter and the power outlet. Make sure
the DC power jack is firmly plugged into the power socket
of the switch.
Check the power switch of the network device attached to
the switch; make sure it is turned ON.
Check the network cable; make sure it is properly
connected to the switch and the network device.
Check the network cable; make sure the UTP cables
comply with EIA/TIA 568 and Category 5 specification.
manuals search engine
4