Base Station - Velleman BTSP2 Bedienungsanleitung

4. Features
• can be used as clip-on car kit
• full duplex, DSP technology for noise and echo cancellation
• independent Bluetooth® headset, taken away easily
• one-touch answering, call rejection and last number redial
• supports two profiles - hands free and headset
• super bright LED caller-ID display in three ways
• easy fixing on the sun visor
• rechargeable battery
• no installation required
5. Overview
Refer to the illustration on page 2 of this manual.
A ear device
1 USB connector
2 function key
3 status indicator
4 microphone
5 ear plug
6 volume up
7 volume down
6. Installation
• The device can be used on the table or attached to the cars
sunshield.
• To attach the base station to the sunshield, first slide the
mounting bracket [H] in the retaining tabs at the back of the

base station.

• Slide the open end of the mounting bracket [H] over the
sunshield. This can be done in 2 ways (see below). When using
the rear view mirror, set the display to mirrored (see §7).
00 (01/02/2011)
BTSP2
base station
B speaker
C volume knob
D DC jack
E LCD display
F charging indicator
G USB connector
H mounting bracket
4
®
Velleman