Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Preview and Record Video
1 Be sure your video device is playing a video
2 Click "Preview" and you will see video playing in the preview window. You will notice the
status indicator displaying "Preview".
3 Click the "Stop" ( ■ ) button or press the "Esc" key on your keyboard to stop video preview.
4 If you Click the Red "Record" (
momentarily, then start again. When the video preview starts again, you are recording.
You will notice the status indicator displaying "Recording" and the Time count start.
5 To Stop recording, press the "Stop" ( ■ ) button or press the "Esc" key on your keyboard.
6 You will notice that the file name has been added to the playback list box.
Pause Recording
1 While recording video from a source, you can Pause the recording and continue the
recording in a different portion. This is useful if you plan to change tapes and mix
video contents.
2 While Recording, press the "Pause" ( || ) button, your Recording will stop while the
source video still plays. You can resume recording when you press "Record" (
or the "Pause" ( || ) button.
3 This makes it possible to capture different video sources into a single file instead of
multiple files.
Ways to Begin Recording
1 You can start recording from the Stop or idle status in CapWiz or while you are
previewing video.
2 Click the red Record (
3 To Stop recording, Click the "Stop" ( ■ ) button or the "Esc" key on your keyboard.
4 The video will be displayed in the resolution you selected for the video capture:
• VCD 352 x 240 NTSC / 352 x 288 PAL
• SVCD 480 x 480 NTSC / 480 x 576 PAL
• DVD 720 x 480 NTSC /720 x 576 PAL
Playback Captured Video
Captured video files can be displayed on your computer monitor or be decoded through
Instant DVD+MP3 for display on a TV or recorded to video tape. Use the "Playback On"
selection to determine where video will be displayed.
Playback on the Computer Screen
This is the default setting. Video will be played back at the resolution it was captured in.
1 Click on the file name in the Playback List Box, then click on the "Play" ( ► ) button. You
may also double click on the file name for Instant Playback. You will notice that the
status indicator turns Green and the display changes to Play.
2 To Stop Playback, Click the Stop ( ■ ) button or press the "Esc" key on your keyboard.
14
Downloaded from
www.Manualslib.com
●
) button while previewing video, the video will stop
●
) button to begin recording at any time.
manuals search engine
●
) button
Werbung
Inhaltsverzeichnis
