Seite 1
FP-IN9 SLI Motherboard Socket 775 User’s Manual LGA775 ATX NB: NVIDIA nForce 650i SLI SB: NVIDIA nForce 430 SLI 1066MHz FSB Dual DDR2 800 NVIDIA Gigabit LAN 4x SATA 3Gb/s 7.1-Channel HD Audio Silent OTES™ Technology For more information: FPIO LED Lighting www.abit.com.tw...
Seite 2
If you do not properly set the motherboard settings, causing the motherboard to malfunction or fail, we cannot guarantee any responsibility. The Fatal1ty name, Fatal1ty logos and the Fatal1ty likeness are trademarks of Fatal1ty, Inc. All rights reserved. Built to Kill is a trademark of PWX, LLC.
Seite 3
My vision for Fatal1ty hardware is to allow gamers to focus on the game without worrying about their equipment, something I’ve preached since I began competing. I don’t want to worry about my equipment.
Seite 4
This is just the beginning. We’re already in development for several new products, and I’m really grateful to all my Fatal1ty partners for helping make my dreams a reality. I know there is a business side to all of this, but for me the true reward is making products that are so good I can win with them –...
MediaShield with SATA RAID 0, 1, 0+1, Miscellaneous 5, and JBOD • ATX form factor (305mm x 245mm) • Vista HW Ready Specifications and information contained herein are subject to change without ※ notice. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
To prevent shorting the PCB circuit, ※ please REMOVE the metal studs or spacers if they are already fastened on the chassis base and are without mounting-holes on the motherboard to align with. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
For incorrect CPU ratio/clock settings in the BIOS, press <Del> key to enter the BIOS setup menu right after powering on system. Set the CPU operating speed back to its default or an appropriate value. Save and exit the BIOS setup menu. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Seite 11
Danger of explosion may arise if the battery is incorrectly renewed. ※ Renew only with the same or equivalent type recommended by the battery ※ manufacturer. Dispose of used batteries according to the battery manufacturer’s instructions. ※ FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
This connector supplies power to CPU. The system will not start without connecting power to this one. ATX4P1: Auxiliary 12V Power Connector This connector provides an auxiliary power source for devices added on PCI Express slots. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Connects to the Suspend LED cable (if there is one) of chassis front panel. • PWR (Pin 6, 8): Connects to the Power Switch cable of chassis front panel. • PLED (Pin 16, 18, 20): Connects to the Power LED cable of chassis front panel. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
CPUFAN1: CPU Fan Power Connector • SYSFAN1: System Fan Power Connector • AUXFAN1~2: Auxiliary Fan Power Connector These fan connectors are not jumpers. DO NOT place jumper caps on these ※ connectors. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
2. Use your right-thumb to raise the load plate. Lift it up to fully open position. 4. Visually inspect if the CPU is seated well into the socket. The alignment key must be located in the notch of package. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Seite 16
A higher fan speed will be helpful for better airflow and heat-dissipation. ※ Nevertheless, stay alert to not touch any heatsink since a high temperature generated by the working system is still possible. 1-10 FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Usually there is no hardware or BIOS setup required after adding or removing ※ memory modules, but you will have to clear the CMOS memory first if any memory module related problem occurs. FP-IN9 SLI 1-11 Downloaded from www.Manualslib.com manuals search engine...
Seite 18
Static electricity can damage the electronic components of the computer or ※ optional boards. Before starting these procedures, ensure that you are discharged of static electricity by touching a grounded metal object briefly. 1-12 FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
There will be no video output in the Normal Mode for one PCIE graphics card ※ installation into [PCIEXP2] (Slave) slot. Never remove or lose the “SLI Switch Card”, as this card still works in this ※ Normal Mode. FP-IN9 SLI 1-13 Downloaded from www.Manualslib.com manuals search engine...
Seite 20
(Golden Fingers). 3. Reverse the card direction so as to have the “SLI Mode” side toward the retention slot base. Insert the card into the bottom of the base. 1-14 FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Seite 21
Refer to the instruction of your SLI-ready graphics cards on how to select ※ Normal or SLI video output mode. For SLI mode, connect your monitor to the SLI-ready graphics card installed on the [PCIEXP1] (Master) slot only. FP-IN9 SLI 1-15 Downloaded from www.Manualslib.com...
Make sure to configure the “Master” and “Slave” relation before connecting ※ two drives by one single ribbon cable. The red line on the ribbon cable must be aligned with pin-1 on both the IDE port and the hard-drive connector. 1-16 FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
The motherboard in this photo is served for DEMO only, and may not be the ※ same type or model as the one described in this user’s manual. FP-IN9 SLI 1-17 Downloaded from www.Manualslib.com manuals search engine...
USB ports of your chassis. Pin Assignment Pin Assignment Data0 - Data1 - Data0 + Data1 + Ground Ground Make sure the connecting cable bears the same pin assignment. ※ 1-18 FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Pin 4 “AVCC” of this header. Pin Assignment Pin Assignment (HD AUDIO) (AC’97 AUDIO) MIC2 L MIC In AGND MIC2 R MIC Power AVCC FRO-R Line Out (R) MIC2_JD F_IO_SEN FRO-L Line Out (L) LINE2_JD FP-IN9 SLI 1-19 Downloaded from www.Manualslib.com manuals search engine...
Seite 26
Right-click the “Realtek HD Audio Manager” icon system tray. Click “Audio I/O” tab, and then click “Connector Settings”. Click “Disabled front panel jack detection”, and then click “OK” to confirm. 1-20 FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
SLI_LED1: This LED lights up when the “SLI Switch Card” is working under “SLI” Mode. 1.9.2 Onboard Buttons • PWRSW1: Push this button to power on the system. • RESET1: Push this button to reset the system. 1-22 FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Mic-In: Connects to the plug from external microphone. • LAN1: Connects to Local Area Network. • USB1/USB2: Connects to USB devices such as scanner, digital speakers, monitor, mouse, keyboard, hub, digital camera, joystick etc. FP-IN9 SLI 1-23 Downloaded from www.Manualslib.com manuals search engine...
Seite 30
For more information: www.abit.com.tw 1-24 FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
BIOS menu. The BIOS setup screens and descriptions illustrated in this manual are for your reference only, and may not completely match with what you see on your screen. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
These should be used for engineering testing, not for normal applications. There will be no guaranty for the settings beyond specification. Any damage of ※ any component on this motherboard or peripherals resulting therein is not our responsibility. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Seite 33
The option “User Define” enables you to select the following voltages manually. CPU Core Voltage DDR2 Voltage DDR2 REF Voltage CPU VTT Voltage NB Voltage FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
IDE Channel 1 Master Auto Access Mode Auto Capacity 0 MB Cylinder Head Precomp Landing Zone Sector :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Seite 35
This item determines whether the system stops if an error is detected during system boot-up. [All Errors]: The system-boot will stop whenever the BIOS detect a non-fatal error. [No Errors]: The system-boot will not stop for any error detected. FP-IN9 SLI Downloaded from www.Manualslib.com...
Seite 36
640K for systems with 640K or more memory size installed on the motherboard. Extended Memory This item displays the amount of extended memory detected during system boot-up. Total Memory This item displays the total memory available in the system. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
This item appears only for certain processors with the EIST (Enhanced Intel SpeedStep Technology) Function. When set to [Enabled], EIST will dynamically switch between multiple frequency and voltage points to optimize the power and performance balance of the processor and system based on demand. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Seite 38
This item determines when the system will prompt for password - every time the system boots or only when enters the BIOS setup. [Setup]: The password is required only when accessing the BIOS Setup. [System]: The password is required each time the computer boots up. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Seite 39
A larger value will give more delay time to the device for which to initialize and to prepare for activation. Full Screen LOGO Show This item determines to show the full screen logo when booting. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
You may manually set the DRAM timing parameters through the following sub-items, or leave them at their default settings according to the SPD (Serial Presence Detect) data stored in the DRAM. tCL (CAS Latency) tRCD tRAS Command Per Clock (CMD) 2-10 FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Seite 41
Back to Advanced Chipset Features Setup Menu SLI Broadcast Aperture Options: [Disabled], [Auto]. LDT Frequency Options: [1X], [2X] , [3X], [4X], [5X], [6X], [7X], [8X]. FP-IN9 SLI 2-11 Downloaded from www.Manualslib.com manuals search engine...
OnChip IDE/SATA Device ► IDE/SATA Function Setup Press Enter Item Help ► RAID Configuration Press Enter :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults 2-12 FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Seite 43
This item allows you to enable or disable the IDE2 controller. IDE DMA Transfer Access This item selects the DMA mode for devices connected through IDE channels. OnChip SATA Controller This item enables or disables the onchip SATA controller. FP-IN9 SLI 2-13 Downloaded from www.Manualslib.com manuals search engine...
USB Mouse Support Select [BIOS] for the legacy operating system (such as DOS) that does not support USB mouse. OnChip Audio Controller This option enables or disables the audio controller. 2-14 FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Seite 45
This item allows you to use the boot ROM (instead of a disk drive) to boot-up the system and access the local area network directly. Onboard FDD Controller This option enables or disables the floppy disk controller. FP-IN9 SLI 2-15 Downloaded from www.Manualslib.com...
(Resume On Ring/LAN) prior to the date and time set in these items, the system will give priority to the incoming calls or network instead. 2-16 FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Seite 47
If the system’s power is on when AC power failure occurs, the system will power-on when power returns. HPET Support Options: [Disabled], [Enabled]. FP-IN9 SLI 2-17 Downloaded from www.Manualslib.com manuals search engine...
F6: Fail-Safe Defaults F7: Optimized Defaults PCI/VGA Palette Snoop This item determines whether the MPEG ISA/VESA VGA cards can work with PCI/VGA or not. [Enabled]: MPEG ISA/VESA VGA cards work with PCI/VGA. 2-18 FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Seite 49
[Disabled]: MPEG ISA/VESA VGA cards do not work with PCI/VGA. Maximum Payload Size This item sets the maximum TLP payload size for the PCI Express devices. FP-IN9 SLI 2-19 Downloaded from www.Manualslib.com manuals search engine...
This item allows you to control the CPUFAN1 speed. When set to [Enabled], the following items become selectable. CPU FanEQ Target Temp. This item sets the temperature mark for the “CPU FanEQ” function to take effect. 2-20 FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Seite 51
Tolerance”, the speed ratio for the 3-pin fan assembly connected at “SYSFAN1” fan power connector will first run at the speed ratio set by the item “SYS FanEQ Start Control”, and then up to 100%. FP-IN9 SLI 2-21 Downloaded from www.Manualslib.com...
2.12 Save & Exit Setup This option saves your selections and exits the BIOS setup menu. 2.13 Exit Without Saving This option exits the BIOS setup menu without saving any changes. For more information: www.abit.com.tw 2-22 FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Close]: Click to exit this installation menu. The Windows will automatically search for current and updated software by looking up your computer. When this “Found New Hardware Wizard” window appears. Click [Cancel] to start the following procedures. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Follow the prompts on the screen to complete installation. After restarting the system, right-click the Sound Manager icon located at the desktop shortcut. Click item “Sound Manager”. The Realtek HD Audio Manager appears. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
I/O settings and exit. 3.4 USB 2.0 Driver There is no need to install this driver for Windows 2000 with Service Pack 4, ※ Windows XP with Service Pack 1, or their later version. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Execute the ABIT EQ by entering the Windows Menu [Start] [All Programs] [abit] [ABITEQ]. The ABIT EQ shows you the status of Voltage, Fan Speed, and Temperature readings as well. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Execute the FlashMenu by entering the Windows Menu [Start] [All Programs] [abit] [FlashMenu]. This FlashMenu screen appears. You can easily update the BIOS from clicking [Update From File], [One Click LiveUpdate], or [LiveUpdate Step by Step] button. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Disk[32bit]] item. The installation screen appears. Insert one blank floppy disk to the selected floppy drive and click [Build]. Click [OK] to finish building the SATA Driver Disk. Click [Exit] to exit this utility. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Now you have this driver disk ready for installing Windows Operating System. Insert this floppy disk to floppy drive and press <F6> key when the screen instruction prompts you to install a third-party SCSI or RAID driver. FP-IN9 SLI Downloaded from www.Manualslib.com...
Seite 60
For more information: www.abit.com.tw FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
[HLED]: Connecte au câble en nappe de la DEL du lecteur du • LAN1: Connecte au réseau local d’ordinateurs. disque dur (HDD). • USB1/USB2: Connecte aux unités du protocole USB. • [RST]: Connecte au câble en nappe de l’interrupteur de réinitialisation. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Connettori del pannello frontale: [FPIO1] digitali, joystick ecc. • [HLED]: collega al cavo LED disco rigido. • [RST]: collega al cavo Interruttore ripristino. • [SPKR]: collega al cavo delle casse di sistema. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
[HLED]: Conecte el cable del LED del disco duro. • [RST]: Conecte el cable del interruptor de reinicio. • [SPKR]: Conecte el cable del altavoz del sistema. • [SLED]: Conecte el cable del LED de suspensión. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
USB1/USB2: Ligação de dispositivos USB tais como scanners, [NBFAN1] colunas digitais, monitor, rato, teclado, hub, câmara digital, joystick,etc. Conectores de painel frontal: [FPIO1] • [HLED]: Faz a ligação ao cabo do LED da unidade de disco rígido. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
[HLED]: Sujunkite su HDD LED kabeliu. • klaviatūra, koncentratorius, skaitmeninis fotoaparatas, [RST]: Sujunkite su pakartotinos kelties jungiklio kabeliu. • valdymo svirtis ir pan. [SPKR]: Sujunkite su sistemos garsiakalbio kabeliu. • FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
[HLED]: Csatlakoztassa a HDD LED kábelhez. • billentyűzet, központi elosztóhoz, digitális fényképezőgéphez, [RST]: Csatlakoztassa a reszettelés-kapcsoló kábeléhez. • botkormányhoz, stb. [SPKR]: Csatlakoztassa a rendszerhangszóró kábeléhez. • [SLED]: Csatlakoztassa a LED szüneteltet kábelhez • FP-IN9 SLI 4-11 Downloaded from www.Manualslib.com manuals search engine...
USB1/USB2: Tarayıcı, dijital hoparlör, monitör, fare, klavye, • FAN Konnektörleri: [CPUFAN1], [SYSFAN1], [AUXFAN1], dijital kamera, joystick vb. gibi USB aygıtlarını bağlamak [NBFAN1] içindir. Ön Panel Konnektörleri: [FPIO1] [HLED]: Sabit Disk Sürücü LED kablosuna bağlayın. • 4-12 FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Seite 73
دﻟﻴﻞ اﻟﺘﺮآﻴﺐ اﻟﺴﺮﻳﻊ اﻟﻠﻐﺔ اﻟﻌﺮﺑﻴﺔ 4.13 FP-IN9 SLI 4-13 Downloaded from www.Manualslib.com manuals search engine...
Seite 74
راهﻨﻤﺎﯼ ﻧﺼﺐ ﺳﺮﻳﻊ ﻓﺎرﺳﯽ 4.14 4-14 FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
팬 연결부: [CPUFAN1], [SYSFAN1], [AUXFAN1], [NBFAN1] 키보드, 허브, 디지털 카메라, 조이스틱 등과 같은 전면 판넬 연결 컨넥터: [FPIO1] USB 장치들에 연결하십시오. • [HLED]: HDD LED 케이블에 연결하세요. • [RST]: 초기화 스윗치 케이블에 연결하세요. 4-16 FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
If the situation remains the same, try Step 3. Step 3. The same procedure as Step 2, but while discharging the CMOS data, pull out the ATX power connectors from motherboard and remove the button battery during CMOS discharge. FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Seite 84
Memory brand: Type in the brand and model name of your memory module. Example: Memory brand: Kingston (KVR533D2N4/1G) • Memory size: Type in the size of your memory module. Example: 512M* 4PCS FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Seite 85
RMA process? A: After you have gone through the troubleshooting procedures, yet the problem still exists, or you find an evident damage on the motherboard, please contact our RMA center. (http://www2.abit.com.tw/page/en/contact/index.php?pFUN_KEY=18000&pTITLE_IMG) FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
No.50, Valiasr Computer Center, Valiasr St. Jan van Riebeeckweg 15, 5928LG, Tehran Iran Venlo, The Netherlands Tel: 98-21-88943672 Tel: 31-77-3204428 Fax: 98-21-88941655 Fax: 31-77-3204420 Contact: Alireza Khoshdel Chamber of Commerce Venlo – number 12062448 FP-IN9 SLI Downloaded from www.Manualslib.com manuals search engine...
Seite 88
Johnathan “Fatal1ty” Wendel P/N: 4310-0000-61 Rev. 1.00 Downloaded from www.Manualslib.com manuals search engine...