Inhaltsverzeichnis
Werbung
— defrosting/heating
— cooking bacon
— cooking poultry
— cooking sausages
— cooking meat
— cooking fish
— cooking cutlets and burgers
4. Manual cooking mode indicator
5. Cooking time indicator
6. Cooking temperature indicator
7. Stages of the cooking process:
PRE-HEATING — preliminary heating
START TO COOK — ready to work
RARE — weak roasting
MEDIUM — medium rare
WELL DONE — strong roasting
8. Cooking process indicator
9. Вutton OK — to start the heating process
10. Encoder — rotary joystick to select the automatic cooking program, change the temperature and time
I. PRIOR TO FIRST USE
Carefully remove the unit and its accessories from the packaging. Dispose of all packag-ing materials and promotional
stickers.
Keep all warning labels, including the serial number identification label located on the housing.
After transportation or storage at low temperatures allow the appliance to stay at room temperature for at least 2 hours before using.
Wipe the housing of the appliance with a soft, damp cloth. Rinse the inner bowl with warm soapy water and dry thoroughly.
An odour on first use of the appliance is normal and does not indicate a malfunction.
Completely unwind the power cord. Wipe the unit with a moist cloth. Unwanted odour during the first use doesn't signify the
appliance defect. Place the device on a flat, stable, and hard surface away from any objects or cabinets that could be damaged
by steam, humidity, or high temperatures.
Ensure that outer and visible inner parts of the appliance are not damaged, do not have chips and other defects.
II. OPERATION OF THE APPLIANCE
Smart cooking mode
Cooking is allowed only with the lid closed. When using this mode, the cooking time is determined automatically by the
appliance, based on the selected type of product and its thickness. You can control the degree of roasting according to your
taste and remove the ready product at any stage.
1. Prepare the ingredients according to the selected recipe.
2. Plug the appliance into the outlet, the appliance will produce a beep, the entire panel indication will come on for a few
seconds and go off.
3. Turn on the appliance by pressing the button
4. Make sure the appliance lid is closed.
5. Rotate the encoder to select the desired cooking program. The indicator of the selected program will blink.
6. Press OK to confirm. The appliance will produce a beep, the heating process will start, and the cooking indicator will
flash in the PRE-HEATING stage.
10
, the display will come on.
7. When the desired temperature is reached, the appliance will produce 3 short beeps; the cooking indicator will be on
continuously at the PRE-HEATING stage and blink at the START TO COOK stage. Lift the lid of the appliance by the
handle and put the products on the lower plate.
Non-stick coated plates in most cases allows you to cook without the use of oil. However, if necessary, you can apply a small
amount of vegetable or butter to the working surface of the plates.
8. Press the products with the top plate, do not apply excessive force. Within a few seconds, the appliance will determine the
thickness of the products and the cooking time, the countdown of the cooking time will begin. You can control the degree
of readiness of the product, focusing on the cooking process indicator, for example, to get the meat is weak roasting, remove
it when the indicator at the RARE stage will stop flashing and will be on continuously. Similarly, the continuously on ME-
DIUM indicator means a medium degree of roasting, and WELL DONE — a strong degree of roasting. Each time you change
the degree of roasting the appliance will produce 5 long beeps.
In the defrost/heating mode, the cooking indicator indicates the steps of the program. At the end of the program, the appliance
will automatically turn off.
For optimal results, follow the instructions in the recipe book supplied with the appliance.
9. At the end of cooking (when the cooking indicator stops flashing at the WELL DONE stage), the appliance will produce 3
long beeps and turn off automatically. You can turn off the appliance manually at any stage by pressing the button
Gently lift the lid of the appliance and remove the products using wooden or silicone cooking utensils.
10. Disconnect the appliance from the mains; clean the appliance according to the recommendations in the "Appliance Care"
section.
Do not use metal kitchen utensils — they can damage the non-stick coating of the plates.
It is recommended to clean the appliance after each product portion in 1 minute after use in order to avoid drying of food residues,
which will complicate further cleaning.
Manual cooking mode
It is allowed to cook with the lid closed and open. You can also use the appliance in barbecue mode by pressing the limiter and
opening the appliance lid 180° as shown in the scheme
A3
1. Prepare the ingredients according to the selected recipe.
2. Connect the appliance to the mains, the appliance will produce a beep, the entire panel indication will come on for a
few seconds and go off.
3. Turn on the appliance by pressing the button
, the display will come on.
4. Press the M button to switch the appliance to the manual mode. The manual mode and cooking temperature indicators
will flash.
5. By rotating the encoder, set the cooking temperature between 70 and 230°C in 10°C increments.
6. Press the M button to switch to the cooking time setting. By rotating the encoder, set the cooking time between 1 and
88 minutes in 1 minute increments. Press the M button again to return to the cooking temperature setting.
If the cooking time has been set to "00", the appliance will automatically switch off when the set temperature is reached.
7. Press the OK button to start the heating process, the cooking process indicator will flash at the PRE-HEATING stage.
8. When the required temperature is reached, the appliance will beep 3 times; the cooking indicator will be on continu-
ously at the PRE-HEATING stage and come on alternately at the remaining stages. A minute-by-minute countdown of
the cooking time will begin. Place the products on the appliance plates or install the baking pan with ingredients on
the lower plate of the grill (lower the top plate, make sure it fits tightly against the baking pan).
9. In this mode, there is a constant heating of the plates. At the end of cooking, the appliance will produce 3 long beeps
and turn off automatically. You can turn off the appliance manually by pressing the button
appliance and remove the products using wooden or silicone cooking utensils.
10. Disconnect the appliance from the mains; clean the appliance according to the recommendations in the "Appliance Care"
section.
(page 5).
. Gently lift the lid of the
.
Werbung
Inhaltsverzeichnis
