Samsung LE20S8 Bedienungsanleitung Seite 22

Setting the PC
Move
adjust
Move
Move
Downloaded from www.Manualslib.com
Coarse and Fine tuning of the Image (Image lock):
Image lock
the purpose of picture quality adjustment is to remove or reduce
Coarse 0
Fine 0
picture noise. If the noise is not removed by Fine-tuning alone, then
adjust the frequency as best as possible (coarse) and Fine-tune
again. after the noise has been reduced, re-adjust the picture so
that it is aligned on the center of screen.
Enter return
. Preset: Press the SourCE button to select PC mode.
. Press the MEnu button to display the menu.
3. Press the ▲ or ▼ button to select "PC", then press the
. Press the EntEr
. Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the
. Press the ◄ or ► button to adjust the screen quality.
. Press the ExIt button to exit.
Position
Changing the Image Position (Position):
adjust the PC's screen positioning if it does not fit the tV screen.
. Follow the "Coarse and Fine Tuning of the Image (Image Lock)"

. Press the ▲ or ▼ button to select "Position", then press the
Enter return
3. Press the ▲ or ▼ button to adjusting the Vertical-Position.
. Press the ExIt button to exit.
PC Initializing the Image Settings (Image reset):
Image lock 
You can replace all image settings with the factory default values.
Position

Image reset

auto adjustment . Follow the "Coarse and Fine Tuning of the Image (Image Lock)"

. Press the ▲ or ▼ button to select "Image Reset", then press the
Enter return
3. Press the ExIt button to exit.
PC
adjusting the PC Screen automatically (auto adjustment):
Image lock

auto adjustment allows the PC screen of set to self-adjust to the
Position

Image reset

incoming PC video signal. the values of fine, coarse and position
auto adjustment 
are adjusted automatically.
. Follow the "Coarse and Fine Tuning of the Image (Image Lock)"
Enter return
. Press the ▲ or ▼ button to select "Auto Adjustment", then press the
3. Press the ExIt button to exit.
manuals search engine
Press the ▲ or ▼ button to select "Setup", then press the
EntEr button.
EntEr button.
button to select "Image Lock".
EntEr button.
Press the EntEr button.
instructions number 1 to 3.
EntEr button.
Press the ◄ or ► button to adjust the Horizontal-Position.
Press the EntEr button.
instructions number 1 to 3.
EntEr button.
instructions number 1 to 3.
EntEr button.
English - 0