Hanson Electronics D19AL Bedienungsanleitung Seite 6

Controls
Contrast Menu
Brightness Menu
31.5KHz 60Hz PP
BRIGHTNESS
50%
Position Menu
After choosing , Push MENU( ) button.
MEUN( ) : Push this button again & again to change the H/V-position.
: Moves the image vertically up or down.
: Moves the image horizontally left or right.
Size Menu
After choosing , Push MENU( ) button.
MENU ( ) : Push this botton again & agiain to change the H/V-size.
: Increases or Decreases the vertical size of the image.
: Decreases or Increases the horizontal size of the image.
10 User's Manual
: Exits the Contrast menu.
/ : Increase or decrease the Contrast.
: Exits the Brightness menu.
/ : Increase or decrease the Brightness .
Position and size Menu control guide
: Exit to the main menu.
: Refer to
MENU( ) : Toggle position and menu directly.
Geometry Menu
GEOMETRY
PINCUSHION
The Geometry controls allow you to adjust the
PARALLELOGRAM
TRAPEZOID curvature or angle of displayed image.
PINBALANCE
TOP CORNER
BOTTOM CORNER
ROTATION
50%
Atfer choosing , push MENU( ) button.
Pincushion : Increase or decrease the curvature of the sides either inward or outward.
Parallelogram : Increase or decrease the tilt of the sides either to the left or right.
Trapezoid : Increase or decreases the bottom of the screen to be the same as the top.
Pin Balance : Increase or decrease the curvature of the sides.
Top Corner : Increase or decreases the curvature of the top sides.
Bottom Corner : Increase or decrease the curvature of the bottom sides.
Rotation : Rotate the entire display to clockwise or counterclockwise.
Geometry Menu control guide
: Exit to the main menu.
: Move the function to choose.
MENU( ) : Function to choose.
: Move the bow in the or direction to increase or decrease the adjustment.
Moire Menu
Select ON or OFF with
Select H.MOIRE or V.MOIRE with
Controls
After choosing , Push MENU( ) button.
/ key.
/ key.
: Adjust the Moire.
User's Manual 11