urmet Yokis THERMARP Schnellanleitung Zur Installation Seite 16

Wiring via MTR2000ERP(X)
(*) Warning! Where it is necessary to guarantee galvanic insulation to the boiler, it is
essential to interpose the REL1C accessory (See diagram SD542-6054 in the product
data sheet of the MTR2000).
Always make sure that the MTR module is configured with the default values.
Pairing the wireless receiver to the thermostat
▶ On the THERMARP thermostat, open the thermostat configuration menu by holding the
pressed for 3 seconds until the CLOCK
button
A
▶ Use the arrows
menu until the RF WIRELESS
DS1054-055A
230V ~
N
L
(*)
and to move through the various items of the configuration
menu is displayed. Tap on the "Validate" icon
Wiring via MTR2000MRP(X)
icon starts flashing.
B
P16
(*)
.