De Dietrich DIEMATIC-m3 Technische Anleitung Seite 5

English
1 Replacing the display board in the control panel (GT/DTG/C230)
Type DIEM M3 DISPLAY SWE1DP11
200004091-01
SERIAL
1338D0006
NEW
Ref. 7611820
1. Disconnect the mains supply
2. Replace the display board
3. Make a note of the information on the UC board (reference and software version):
4. Reconnect the mains supply
Two UC K3 boards exist:
In the case of a board with reference 200005008 on which the issue
date falls prior to 1210, the board must be scanned with the AD264
deprogramming tool or replaced with an up-to-date board from the
spare parts centre. If that board has a software version higher than or
equal to 1210, no update is required.
In the case of a board with reference 200010216 on which the issue
date falls prior to 1209, the board must be scanned with the AD264
deprogramming tool or replaced with an up-to-date board from the
spare parts centre. If that board has a software version higher than or
equal to 1209, no update is required.
12/11/2013 - 7610870-01
UC K3
200005008
(GT330/ 430/ 530)
(DTG230/ 330)
UC K3
200010216
(C 230)
Carte affichage Diematic-m3
1210
CU K3 ICV8V 200005008-01
Serie-Nr:
1244U0002
1209
UC K3 C230 SW 1243
Art-Nr: 200010216-01
Serien-Nr: 000003
1210
>
1210
<
ODP
(AD264)
NEW
1209
>
1209
<
ODP
(AD264)
NEW
C004664-B
5