Tensions SILVER LITHIUM 5.1 Bedienungsanleitung Seite 11

3 Connecting
Connect the system to the required sound source in accordance with the diagram:
1. Connect the centre speaker (identified by the inscription "Centre" on
the back) to the back of the subwoofer. The inscription "Cen" identifies
the corresponding output.
2. Connect the other speakers to the remaining speaker outputs.
3. Connect the 9-pin audio cable to the back of the subwoofer.
4. Connect the other end to the back of the decoder.
5. Connect the power cable to the back of the subwoofer ("DC Input") and
to the back of the decoder ("DC Input").
6. Insert the mains plug into a power socket.
7. To switch on the system press the power button on the back of the
subwoofer.
4 Connecting the decoder
INPUT LINE IN OPTICAL
POWER
DC
INPUT INPUT
I
0
11
Decoder
COAXIAL DC IN
OP CO
D
GB
F
E
I