Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
FLEXSYS F8 - F10 - F12 - F15
FLEXSYS F8 - F10 - F12 - F15
DESCRIPION
The speakers F8. F10, F12 and F15 of FLEXSYS series use cutting edge digital
amplifiers of the DIGIPRO series, providing with powers 200W and 400W to meet the
®
requirements of any kind of application.
These highly efficient amplifiers provide high power with limited weight and dimension.
Thanks to the low power dissipated, the cooling of the amplifier module does not require a
fan.
The digital preamplifier with DSP (Digital Signal Processing) controls the audio crossover
between the acoustic components, the frequency response, the limiter, and the acoustic
alignment. A selector enables to select one of two different equalizations - "FLAT" or
"PROCESSED" - to provide high versatility for the different applications.
The amplifiers DIGIPRO
®
Power Supplies) technology.
This technology increases power supply efficiency and minimizes its weight.
FLEXSYS F8
The F8 bi-amped active speaker is equipped with a
®
DIGIPRO amplifier delivering 150W RMS for the bass
section and 50W RMS for the high frequency section.
F8 active two-way speaker features woofer 8" (voice
coil 1,5") and a neodymium compression driver 1"
(voice coil 1") on a 90°/40°x 60° asymmetrical horn.
The speaker is made of 12mm ply wood, the one top
handle
housing and
the 10 M8 threads located on the
sides and the back of the speaker are enabling easy
transport and installation.
The speaker has been designed to be used also as
stage monitor (40° angle), by rotating the horn you can
maintain the same audio coverage angle of high
frequencies also when the speaker is used as monitor.
In the bottom of the box there is a standard pole mount
cup (D36mm).
FLEXSYS F10
F10 bi-amped active speaker is equipped with a
®
DIGIPRO amplifier delivering 150W RMS for the bass
section and 50W RMS for the high frequency section.
F10 active two-way speaker features a woofer 10"
(voice coil 2") and a neodymium compression driver 1"
(voice coil 1") on a 90°/40°x 60° asymmetrical horn.
The speaker is made of 12mm plywood, the one top
plastic handle and the 12 M8 threads located on the
sides and the back of the speaker are enabling easy
transport and installation.
The speaker has been designed to be used also as
stage monitor (40° angle), by rotating the horn you can
maintain the same audio coverage angle of high
frequencies also when the speaker is used as monitor.
In the bottom of the box there is a standard pole mount
cup (D36mm).
15
400W use power supplies featuring SMPS (Switched-Mode
FLEXSYS F8 - F10 - F12 - F15
FLEXSYS F8 - F10 - F12 - F15
FLEXSYS F12
The F12 bi-amped active speaker is equipped with a
®
DIGIPRO amplifier delivering 300W RMS for the bass
section and 100W RMS for the high frequency
section.
F12 active two-way speaker features woofer 12"
(voice coil 1") and compression driver 1" (voice coil
1,5") on a 90°x40° CD- horn.
The speakers' horizontal directivity is 90° by default
factory setting.
The speaker is made of 15mm birch plywood, the
three plastic handles
and
the 12 M10 threads located
on the sides and the back of the speaker are enabling
easy transport and installation.
The speaker has been designed to be used also as
stage monitor (45° angle), by rotating the horn you can
maintain the same audio coverage angle of high
frequencies also when the speaker is used as
monitor.
In the bottom of the box there is a standard pole mount
cup (D36mm).
FLEXSYS F15
F15 bi-amped active speaker is equipped with a
®
DIGIPRO amplifier delivering 300W RMS for the bass
section and 100W RMS for the high frequency
section.
F15 active two-way speaker features a woofer 15"
(voice coil 2") and a neodymium compression driver 1"
(voice coil 1,5") on a 90°x40° CD- horn.
The speakers' horizontal directivity is 90° by default
factory setting.
The speaker is made of 15mm birch plywood, the
three plastic handles and the 12 M10 threads located
on the sides and the back of the speaker are enabling
easy transport and installation.
The speaker has been designed to be used also as
stage monitor (45° angle), by rotating the horn you can
maintain the same audio coverage angle of high
frequencies also when the speaker is used as monitor.
In the bottom of the box there is a standard pole mount
cup (D36mm).
Handle
Handle
M8
M8
M8
M8
M8
M8
M8
F10
F8
M10
Handle
M10
M8
M10
Handle
M8
Handle
M8
M10
M8
M10
M10
F12-F15
16
Werbung
Inhaltsverzeichnis
