Manual; Watt Constant - Tunturi Pure Cross F 6.1 Betriebsanleitung

• Turn the jog wheel and select

"Manual"

• Press the jog wheel to confirm and
enter the Setting screen (1).
Setting screen (1)
• Turn jog wheel to select item
• Press the jog wheel button for
confirmation and continue the range
setting at the right.
• Turn jog wheel to change setting
ranges
• Press the jog wheel button to confirm
and enter the Workout screen.
Workout screen
The X-axis unit is shown according to
the selection of Energy/Time/Distance in
Set screen.
Energy Unit:
Time Unit:
Distance Unit:
• During workout, press the jog wheel
button to switch the Y-axis between
• Nm↔ bpm
• The bar chart denotes torque Nm
value. Rotate the jog wheel to adjust
the Nm value.
16
Manual
kcal
min
km in metric
mile in Imperial
• The white dot line shows current
position, which moves rightward as
calorie /time/distance increases.
• The orange curve shows the user's
actual heart rate, which varies as the
heart rate frequency goes up and
down
To stop your workout see:
"End your workout"

Watt Constant

• Turn the jog wheel and select
"Watt Constant"
• Press the jog wheel to confirm and
enter the Setting screen (1).
Setting screen (1)
• Turn the jog wheel to adjust target
Watt value.
• Press the jog wheel to confirm and
enter the Setting screen (2)
Setting screen (2)
• Turn jog wheel to select item
• Press the jog wheel button for
confirmation and continue the range
setting at the right.