Quer URZ0181 Bedienungsanleitung Seite 5

Connecting your Set Top Box
a) Antenna to set top box connection
Connect the aerial to the unit through ANT IN jack.
b) Set top box to TV connection
Connect the unit to TV with scart cable through scart socket.
c) Turn on your TV and the unit, then select AV IN.
Main menu
1. Installation
When user connects set top box (STB) for the first time, no channels are stored in
the unit, User should search channels first as below:
1.1. Press <OK> to enter
Installation page , then press
<CH+> / <CH-> to select the item
you want to set up, <V-> / <V+>
and <OK> to select OSD
language, Country, Time Zone
where user locates in. Also turn
on/off Summer time, LCN (Logic
channel number list an exclusive
number for every channel in ON
mode), ANT Power (Supply power
for antenna connected). Press
<OK> to save the settings. See
figure 1.
1.2. Press red button <EPG> to
confirm the setting, system will
start to search channels
automaticcaly. Green button
<AUDIO> for search channels
when user know the frequency
point. See figure 2 & 3.
46 5 English English
Figure 1
Figure 2