Installation - Fellowes Rapido Wireless Charging Pod Bedienungsanleitung

SAFETY INSTRUCTIONS/WARNING
• Rapido Wireless Charging Pod is for charging Qi™ compatible smartphone only.
• Only use the power supply that was supplied with this product.
• It is normal for the wireless charging surface to get warm during charging. If there is an issue while charging, the
indicator lights will flash.
• Keep flammable materials away from charging surface.
• Only use the wireless charger for its intended purpose. Improper use, or use of incompatible devices may result in a
risk of fire, explosion, or other hazard.
• DO NOT attempt to charge a device that is damaged or an open battery case or a device that is not Qi™ compatible.
• DO NOT attempt to disassemble or repair the wireless charger.
• DO NOT use if power cord or transformer is damaged.
• Keep the wireless charging surface clean and dry.
• Use a soft, clean, dry cloth to clean the surface of the wireless charger.
• For indoor use only.
CAPABILITIES
Port Description Specifications
1 Barrel Connector Power (12V, 3A)
2 USB Port (Type A) Fast Charging 5V,9V,12V, Max 2.4A
3 USB Port (Type C) Fast Charging 5V,9V,12V, Max 2.4A
4 Wireless Charging Pad 5V~9V, Max 10W
The frequency range is 110KHZ ~ 205KHZ.
The Maximum H-Field is 42dBuA/m
PARTS PROVIDED
A Stand B Charging Pod
2
RapidoChargingKit_411747_RevB_10L_112619.indd 2-3
ENGLISH
4
3
1
C Power Supply D Adhesive Cable Clips (2)

INSTALLATION

STEP 1
Plug in power supply to charging pod.
STEP 3 (OPTIONAL)
Place charging pod onto provided stand.
2
STEP 5
Adhesive cable clips (D) are included for the use on
height adjustable workstations. Position the cable away
from moving parts leaving enough slack to cover the
full motion of the workstation.
D
STEP 2
Plug power cable into the nearest outlet.
STEP 4
Place charging pod with or without stand onto table or
sit-stand workstation.
STEP 6
Place your Qi-enabled device onto the charging pad or
use the USB ports to charge your device.
Review your devices manual to see if it's Qi-enabled.
White LED
Standby OFF
Charging On
Foreign Object
Flash
Detected
11/26/19 1:23 PM
3