Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USE
Operation
•
Switch on W autmat which is connected to the appliance.
•
On-Off switch control knob should be set "1". In this situation, yellow indicator will be on. That indicator
is on refers to the operation of switch.
•
Thermostad control kmob should be adjusted to the required temperature value. In this situation white
indicator will be on. When the temperature reaches the required value white indicator will be off.
0
Off
30°C
Minimum temperature
-----
Intermediate temperatures
110°C Maximum temperature (approx.)
Turning Off
•
Thermostat control knob should be set to "0" stage.
•
Switch control knob should be set to "0" stage.
•
Switch off W automat which operates the appliance.
CLEANING AND MAINTENANCE
•
Do not wash the appliance with water jets.
•
Before cleaning the appliance, disconnect the electrical power supply.
•
Do not use sharp objects which can scratch and damage steel or coated surfaces.
•
In case of any failure at the appliance, call the authorized technical service. The appliance should be
examined by professional technical staff.
Controller
Setpoint (display and modification of desired temperature value)
•
Press button
•
By keeping button
minumum SPL and the maximum SPH limit).
•
When button
for at least half second , to display the setpoint value,
pressed , use button
is released , the new value is stored.
www.combisteel.com
or
set the desired value (adjustment is within the
8
Werbung
Inhaltsverzeichnis
