Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATION
1. Once the fan has been assembled correctly connect the mains plug to the mains
socket. Ensure the speed control switch is set to 0 before plugging in.
2. Turn the speed control switch to 1, 2 or 3 to select the desired speed. To turn off
GB
the fan, simply press switch 0.
0= Off 1= Low speed 2=Medium speed
3. To make the fan oscillate push down the oscillation knob located on the top of the
motor housing and the fan will oscillate from side to side.
To stop the fan from oscillating, lift up the oscillation knob.
4. Tilting Adjustment
Loosen the tilt adjustment knob to rise or lower the fan and firmly re-tighten the knob
when the desired height of fan is obtained.
CLEANING AND CARE
Be sure to unplug from the mains socket before cleaning.
To disassemble the fan, do the assembly in the reverse order.
Wash all removable parts in warm soapy water.
Wipe the fan body with a damp cloth. Do not immerse the motor housing into water
or other liquid.
Do not use harsh abrasives, solvents, chemical cleaners, petrol or similar to clean
this appliance as these may damage the plastics.
When not in use store your appliance in a safe and dry place.
SPECIFICATIONS
220-240V~ 50Hz 40W
IMPORTANT DISPOSAL INSTRUCTIONS
As a responsible retailer we care about the environment.
As such we urge you to follow the correct disposal procedure
for your product and packaging materials. This will help
conserve natural resources and ensure that it is recycled in a
manner that protects health and the environment.
3= High Speed
5
Werbung
Inhaltsverzeichnis
