VANMASS CTVK13 Handbuch Seite 2

CATALOG
EN
Overview............................................................... 02
Installation Steps.................................................. 04
Using Steps ........................................................... 06
Specifications ....................................................... 08
Attentions ............................................................. 08
2. Find a suitable place in your automobile outlet, insert the car
mount.
Overview
Silicone Pads
Bottom Tray
01 02
Using Steps
1. Press the release button then the clamp arms open
automatically.
2. Put the phone in the car mount then press the clamp arms to
grasp the phone.
05 06
3-level Air Vent Clip Lever
Ball Joint
3-level Air Vent Clip
Screw Knob
Clamp Arms
Ball Joint
The Suitability of Car Air Vent
horizontal and verticle
Grip Nut
non-intensive, circular or special-shaped
Release Button
3. After using, please press the release button again to open
the clamp arms and take out the mobile phone as shown in
the picture.
英语
Attention: To protect your 1. Take out the grip nut on the mount, assemble it with vent clip.
air vent blade, please adjust
the air vent clip properly
and do not use the air vent
clip too tight.
Twist-lock Air Vent Clip
Support
Nonsupport
03 04
Product Name
Model
Applicable Place
Package List
The parameters above are derived from the laboratory of VANMASS®.
The actual parameters would be different because of products
and other factors. The image shown here is indicative only.
Avoid dropping.
●
Do not disassemble.
●
Please install the car mount on a suitable place before
●
driving, do not operate and adjust the car mount during
driving.
Do not install the car mount in places which interfere with
●
airbag or driving.
Please do not twist the air vent clip too tight, to protect the
●
air vent blade.
Keep the car mount away from children.
●
07 08
Installation Steps
Specifications
Car Mount
CTVK13
Air Vent
Car Mount ×1,
Air Vent Clip ×2,
User Manual ×1
Attentions