Panasonic CF-VNP015U Bedienungsanleitung

Printed in Japan
Thank you for purchasing this Digitizer pen.
The Digitizer pen is used to select items and enter characters on a computer screen. Be sure to read this Operating Instructions and
also the Reference Manual of your computer before use.
Accessories
Digitizer Pen .............................................................. 1
<CF-VNP015U>
Operating Instructions (This leafl et)
•
Using the Digitizer Pen
The Digitizer pen operations are described under "Touch Screen Operation" in the
Replacing the Tip
When the pen tip becomes worn down and operation becomes diffi cult, follow the procedure below and replace the tip.
Flat end
<CF-VNP016U>
Model No./Modell-Nr./Numéro de modèle/ 品番
<CF-VNP016U>
NOTE
The supplied replacement tips and tip replacement tool are exclusively for use with this
Digitizer pen, and should not be used with other pens, etc.
If the tip becomes too short, it may be diffi cult to pull out. Replace the tip before it becomes
too short.
1
Clasp the worn tip with the tip replacement tool, and pull it out in
the direction of the arrow.
2
Clasp the replacement tip with the tip replacement tool, and insert
it straight into the Digitizer pen, fl at end fi rst.
INSTRUCTIONS D'UTILISATION
ENGLISH
Replacement Tip ......... 5
OPERATING INSTRUCTIONS
BEDIENUNGSANLEITUNG
Stylet Numériseur
デジタイザーペン
CF-VNP015U/CF-VNP016U
DFQX5707ZA FJ0309-0
Tip Replacement Tool ... 1
Reference Manual of your computer.
取扱説明書
Digitizer Pen
Digitalstift