Samsung SSA-R2001 Kurzanleitung Seite 7

EXTERNAL CONNECTION
WIRING DIAGRAM
Wiegand Data 0 Out
Wiegand Data 1 Out
Tamper Switch Out(NC)
Tamper Switch Out(COM)
CONTROLLER
Buzzer Control In
LED Control In(Red)
LED Control In(Green)
LED Control In(Orange)
Category
Connect the DC+12V to the red line.
Power Supply Unit
Connect GND to the black line.
Connect the green line of the product to the Wiegand D0 input port of the controller.
Wiegand
Connection
Connect the white line of the product to the Wiegand D1 input port of the controller.
Enables you to turn on or off the LED indicators.
To control green indicator, connect the yellow line to the controller's output (relay).
LED Control
Connect the blue with white stripes to control the orange indicator, connect the
white with red stripes to control the red indicator.
Enables you to turn on or off the buzzer.
Buzzer Control
To control the buzzer, connect the blue line to the controller's output (relay)
Connect the COM port (gray line) of the product's tamper switch to GND; connect the NC
Tamper Control
port (green line with white stripe) of the tamper switch to the input port of the controller.
RS-232
Connect to the COM port of the PC. (Connect pin 2 of the DB-9 connector to the purple
Connection line; connect the black of the device (RS-232 GND) to pin 5 of the DB-9 connector)
SSA-R2001
Green
White
Green with white stripes
Gray
Blue
White with red stripes
Yellow
Blue with white stripes
Red
DC +12V
POWER
Cable Color
QUICK GUIDE
RS-232(TX)
Purple
PC
RS-232(GND)
Black
Black
GND
English_
7