Werbung
Verfügbare Sprachen
Verfügbare Sprachen
We would like to congratulate you
on your purchase of an PROLOOP
FSMplus Field Strength Meter. You
have chosen a modern and reliable
system.
Please make sure to read the operat-
ing instructions carefully before us-
ing this equipment. They will provide
you with important information on the
safety, use and operation of the de-
vice.
The PROLOOP FSMplus is an ideal
solution for measuring, comparing
and starting up an induction loop sys-
tem according to the requirements of
the IEC60118-4 Norm.
The ergonomically designed, hand-
held meter has two calibrated meas-
uring functions and two filter settings
for the evaluation of background
noise and the magnetic field strength.
You can use the PROLOOP FSMplus
headphone jack to listen to and test
the loop signal.
The PROLOOP FSMplus comes com-
plete with the batteries required and
an audio CD with special test signals.
The CD contains different sine test
signals in the 100Hz to 6kHz range.
10 English
Safety instructions
Use "AA/LR6" batteries only.
Do not expose the meter to water
in any way.
Should any water penetrate into
the enclosure, it may destroy the
electronics. Do not store the de-
vice outside.
To clean the meter, wipe it
carefully with a dry cloth – never
use any type of chemicals or
water.
Werbung
