Herunterladen Inhalt Inhalt Diese Seite drucken

Meaning Led; Fuse Replacement - TechGrow Eco serie Handbuch

Minimale lüfterdrehzahl
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Example
The set minimum fan speed is 40%.
The maximum fan speed is 100%.
The set temperature is 27 °C.
The hysteresis is 2 °C.
In this case, the idle speed is 70% (100% - 40% = 60%
range, divided by 2 gives the distance to the exact
middle: 30%). The idle speed lies in the exact middle of
40% and 100%, therefore at 70% (100% minus 30%).
If the measured temperature is equal to the set
temperature of 27 °C, the fan runs at idle speed, so at
70%.
The temperature can fall or rise within the set hysteresis
range of -/+ 2 °C. The fan speed will then decrease or
increase by 15% per degree. After all, the range is 60%,
divided by a range of 4 (- 2 °C and + 2 °C). So if the
temperature drops by one degree to 26 °C, the fan
speed will decrease by 15% in proportion to the idle
speed, and therefore decrease to 55% (70% minus 15%).
If the measured value is 28 °C, the fan speed increases
by 15% in proportion to the idle speed. The fan speed
becomes 85%. If the measured value rises to 29 °C, the
speed increases again by 15% to the maximum fan
speed.
Min
Max
Idle
40%
100%
70%
20%
100%
60%
15%
100%
57,5%

5. Meaning LED

The Clima Eco Minimum Fan Speed has an indicator LED.
Green: stable climate.
Red:
high temperature.

6. Fuse replacement

If a short circuit occurs due to fan overload, the fuse will
blow. Even if the Clima Eco Minimum Fan Speed does
not operate at all, in the worst case, this could indicate a
blown fuse. To replace the fuse you have to open the
Clima Eco Minimum Fan Speed. Complete the following
steps:
____________________________________________________________________________________________________________________________
TechGrow
| Innovative Growing Solutions
Hys
+/- per
1 °C
2 °C
15%
2 °C
20%
2 °C
21,25%
1. Remove the plug from the socket.
2. Open the housing by unscrewing the 4 screws on
the back of the Clima Eco Minimum Fan Speed.
3. Locate the fuse and remove it.
4. Insert a new 5 amp fuse.
5. Screw the 4 screws to close the housing.
Your Clima Eco Minimum Fan Speed is ready for use
again.
9

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Clima eco

Inhaltsverzeichnis