Do Not Disturb Mode; Remote Control - Xindao Square keyfinder 2.0 Bedienungsanleitung

Reconnecting the Tag
The Tag automatically connects to the phone upon pairing. If a Tag goes out of Bluetooth range, it becomes discon-
nected. When the Tag comes back within range, it will automatically reconnect.
Echo app navigation
The navigation bar consists of four tabs:
Tag List - Tag List displays all tags within Bluetooth range of your phone
Tag - The Tag dashboard to control and setup your Tag
Media - Create and browse your media content
Settings - Select your preferred settings
Crowd Searching
1. Launch Echo and tap on the top left icon in Tag List.
2. Tap on Crowd Searching and ensure that Crowd Searching is enabled.
3. Go back to Tag List and swipe left on the lost Tag in Tag List.
4. Tap on Lost to report the Tag as lost.
When someone locates your Tag, you will receive a notification with the updated location. Tap on the notification to
see its location on the map.

Do not disturb mode

You can schedule periods during which your phone and Tag would not alert. This is useful if you prefer not to be
disturbed during times such as a meeting, movie or while you are sleeping.
1. Download Echo app and tap on the top left icon in Tag List in the app.
2. Tap on the Do Not Disturb switch to enable.
3. Tap on Schedule to set the Do Not Disturb period.
4. Select the time range. Tap Confirm to save.
5. Choose the day of the week. Tap on the top left arrow to go confirm.
6. Tap on Save on the top right. Your schedule will appear under Scheduled.

Remote control

Remotely Take Photos or Videos
1. Launch Echo and tap the Tag you wish to use as a remote.
2. Tap on the Media tab. Tap on Photo or Video.
3. Press the button on the Tag to remotely take a photo or video.
5