Microsd Card Insertion - Oregon Scientific ATC Chameleon dual lens Schnellstartanleitung

Operating Elements -
1� Open the side hatch�
2� Insert the MicroSD card until it clicks in place� Ensure the MicroSD card terminals are facing
down�
3� To remove the MicroSD card, push the card until it clicks then pull the card out�
Note
• Always insert or remove the MicroSD card when the the camera is off�
• MicroSD cards with Class 6 or above are recommended to use for the best performance
during recording�
• Supports up to 32GB MicroSD cards�

MicroSD card Insertion

ATCChameleon – 9