Mitel ST Voice Switch Wall Mount Kurzanleitung Zur Installation Seite 4

Mounting the Bracket and Specifications
Installing the ST Voice Switch into the ST Voice Switch Wall
Mount Bracket
1. On the ST Voice Switch, remove the
right side top cover screw, as shown in
the image to the right.
2. Align the slots on the left side of the
Mitel Voice Switch with the tabs on the
bracket, slide the Mitel Voice Switch
slots onto the tabs on the bracket, and
then rotate the Mitel Voice Switch into
the bracket.
3. Re-install the right side top cover
screw to securely attach chassis to
bracket.
ST Voice Switch Wall Mount Bracket Specifications
Feature Specification
Dimensions 14-5/16 x 10-7/8 x 1-3/4 inches (363 x 277 x 44 mm)
Weight 2.7 lbs. (1.23 kg)