Opening The Cover; Using The Touchpad; Turning Off - Motorola ML910 Kurzanleitung

Opening the Cover

1. Press the top cover latch
2. Lift up the cover. You can tilt the cover forward or backward for
optimal viewing clarity.
Turning On
1. Make sure the computer has a charged battery or is connected
to the AC power supply.
2. Press the power button.
3. Each time the computer is turned on, it performs a Power-On
Self Test (POST), and the operating system (such as
Windows) should load.

Turning Off

To turn off the computer safely, use the "Shut Down" command of
your operating system.
NOTE:
1. Pressing the power button for 4 seconds or longer will shut the
computer off. If the power button is held for 10 seconds or more once
the computer is turned off, this will cause the internal controller to
reset.
ML910 Rugged Notebook - Quick Reference Guide

Using the Touchpad

The touchpad consists of a rectangular pad and four buttons.
Point
Click
Double-click Press and release the left button twice in quick
5
Term
Move your finger on the pad until the cursor points to the
selection on the screen.
Press and release the left button.
–or–
Tap gently anywhere on the pad.
succession.
–or–
Tap twice on the pad rapidly.
Press and hold the left button, then move your finger
Drag and
until you reach your destination (drag). Finally, release
Drop
the button (drop) when you finish dragging your
selection to the destination. The object will drop into the
new location.
–or–
Gently tap twice on the pad and on the second tap, keep
your finger in contact with the pad. Then, move your
finger across the pad to drag the selected object to your
destination. When you lift your finger from the pad, the
selected object will drop into place.
Action