Specifications - Kramp Rx/Tx Handbuch

UK
Reset / Re-Connect
• Press "RESET" on RX unit for a few seconds till monitor displays "PAIRING START
• A countdown to pair of 50 seconds starts
Press
• Press "RESET" button on TX unit until "SAVE DATER" displays
• The RESET/RE_CONNECT is now finished.
Press
Cleaning and Caring
CAUTION !!!
Unplug or power off the system before cleaning.
Do not use sharp or hard objects to clean devices as these may damage the device.
Do not use liquid cleanser or aerosol cleanser.
Clean the devices with a soft, damp cloth from time to time.
Accessories
• 2 Pcs Straps
• 2 Packages screws ( 3M Tape *2 Pcs, screw*8 Pcs)
• Water proof tape

Specifications

Control box type
Frequency range
Barrier-free Transmission
Distance
Power supply
Waterproof
Operation Temperature
Connections
Dimension
PAIRING
START 50
SAVE
DATEN
Wireless Transmitter Control Box (TX)
2.4 GHz
100 M
12V/24V
IP65
-20°C +70°C
Connect with Camera
104(L)*80(W)*30(H) mm
Wireless Receiver Control Box (RX)
2.4 GHz
100 M
12V
IP65
-20°C +70°C
Connect with Monitor
104(L)*80(W)*30(H) mm