Installation Steps - AirLive Live Serie Quick Setup”-Anleitung

Port Layout
Note: The case and port layouts differ between each model of Live switches.
Power Connector

Installation Steps

1 . Remove the switch and accessories from the package
1 .
2 . Live-FSH8R, 16T+, Live-GSH5T, and Live-GSH8T only
2 .
Attach the rubber pads to the bottom of the switch
3 . Live-FSH16T+v2 only
3 .
If you want to use the VLAN function, please select VLAN mode. Please
refer to "VLAN Selector" section for details
4 . Connect power to the switch, make sure "Power" LED is on.
4 .
5 . Connect devices to the switch:
5 .
Connect PCs, router, print servers, AP, or other network devices to the
station ports.
Live-GSH5T/8T only Connect Server with Gigabit card or another
Gigabit switch to the Gigabit Port
Use twisted pair cable, please view "cabling requirement section for
details.
Check whether the "Link/Act" light is on. If not, please make sure the
other device or the PC's power is on
Please do not form a network loop, refer to the "Connectivity Rules"
section for details.
The maximum cabling distance is 100 meter
6 . Please refer to the user's manual in the CD for detail instructions.
6 .
All Live switches feature Auto-MDI/MDI-X function. It allows
users to use straight-thru cable for all type of connections.
Live Series Switches
Station Ports
(5, 8, or 16 ports depending on models)
8 7 6 5 4
3 2
English
1
1