Initial Use - KooZzzi 549015 Handbuch

Congratulations!
You have purchased a KooZzzi product.
Our aim is to provide quality products with
a tasteful design and at an affordable price.
We hope that you will enjoy this product for
many years.
Description (fig. A)
Your 549015 KooZzzi rechargeable bed
warmer has been designed for various wellness
purposes for adults, such as providing warmth
to specific parts of the body (e.g. cold feet),
relieving tension from the neck-shoulder area
and releasing abdominal pain to stimulate
peristalsis.
The bed warmer does not require any liquids.
The integrated heating element heats up the
internal ceramic material in the bottle. The
bottle has a rubber coating which feels
comfortable and must be wrapped in a pouch
and a towel. The bed warmer provides heat for
many hours, depending on the use of a towel,
the use of a blanket or a duvet, and the room
temperature.
The bed warmer comes with a standard pouch,
but other pouches are available.
The bed warmer is suitable for indoor use
only. The bed warmer is suitable for domestic
use only.
1. Bottle
2. Handgrip
3. Charging connection
4. Charging station
5. Power indicator
6. Pouch

Initial use

• Clean the bottle. Refer to the section
"Cleaning and maintenance".
• Clean the pouch. Refer to the section
"Cleaning and maintenance".
• Clean the charging station. Refer to the
section "Cleaning and maintenance".
Use
Charging the bed warmer
(fig. A & B)
The bed warmer must be charged for
approximately 10 minutes.
Before you proceed, we need you to pay
attention to the following notes:
- Do not use the charging station for other
purposes than charging the bed warmer.
- Do not move the bed warmer during the
charging process.
- Do not leave the bed warmer unattended
when it is placed in the charging station
and the mains plug is connected to the
mains. Only charge the bed warmer in a
room where it is visible at all times. If the
bed warmer has been charged completely,
remove it from the charging station and
disconnect the mains plug from the mains.
• Place the charging station (4) on a stable
and flat surface.
• Insert the mains plug of the charging
station (4) into the wall socket. The power
indicator (5) comes on.
• Place the bottle (1) with the charging
connection (3) into the charging station
(4). A buzzer will sound for 3 seconds to
indicate the correct position. The charging
process starts automatically.
• If the process is completed, a buzzer will
sound 10 times after approximately
7-8 minutes. After a few seconds, the
buzzer will sound another 20 times. The
charging process stops automatically.
Note: The bottle will not feel warm directly
after the charging process. The bottle will only
feel warm after approximately 5 minutes after
the charging process is completed.
The maximum temperature will only be
reached if the pouched bottle is wrapped in
a towel and placed under the bedclothes.
• Immediately remove the bottle (1) from
the charging station (4).
• If the bottle (1) is not removed
immediately after the charging process,
take the following actions:
8