HQ Power HQMB15001 Bedienungsanleitung Seite 4

•
•
•
•
4. Description
For mirror balls with a maximum diameter of 12" (30 cm) and
weight of 3 kg. Power cable with Schuko plug.
Refer to the illustrations on page 2 of this manual.
5. Installation Guidelines
•
•
•
•
•
V. 01 – 11/02/2020
Only use the device for its intended purpose. Using the
device in an unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this
manual is not covered by the warranty and the dealer will
not accept responsibility for any ensuing defects or
problems.
Nor Velleman nv nor its dealers can be held responsible for
any damage (extraordinary, incidental or indirect) – of any
nature (financial, physical...) arising from the possession,
use or failure of this product.
Keep this manual for future reference.
1 mirror ball motor
2 axle
3 chain link
4 lifting chain
5 installation eyelet
Have the device installed by a qualified person, respecting
EN 60598-2-17 and all other applicable norms.
The carrying construction must be able to support 10 times
the weight of the device for 1 hour without deforming.
Never stand directly below the device when it is being
mounted, removed or serviced. Have a qualified technician
check the device once a year and once before you bring it
into service. Only install and service the system when area
under the system is blocked.
Install the device in a location with few passers-by that is
inaccessible to unauthorised persons.
Overhead mounting requires extensive experience:
calculating workload limits, determining the installation
material to be used... Have the material and the device itself
checked regularly. Do not attempt to install the device
yourself if you lack these qualifications as improper
installation may result in injuries.
HQMB15001
4
6 mirror ball
7 attachment eyelet
8 safety chain
9 attachment eyelet
©Velleman nv