Royal Catering RCHW 800 Bedienungsanleitung Seite 9

9. As soon as the temperature of the device decreases, the thermostat reacts to it;
the orange light turns on again and the heating bar restarts to heat.
10. After use, reset the thermostat on zero. When that is done, you can simply turn
off the device by switching the ON/OFF knob.
11. Generally speaking, it is advisable to unplug the device while not used.
12. When the device cooled down, take out the water container, empty and clean it.
This should be done after each use to keep the device in perfect hygienic condi-
tion.
13. To clean the rest of the device, watch up to protect the electric parts from hu-
midity and from direct water contact to avoid electric shocks and shortcircuits.
An impregnated cloth is easily enough if you regularly clean the device.
14. If you don´t use the device for a longer time or stock it, check the humidity and
temperature conditions: The air has to be dry and the device should be covered
to be protected from dust deposits.
REGULAR CONTROL OF THE DEVICE
Control regularly that the device doesn´t present any damage. If it should be the case,
please contact your customer service to solve the problem.
WHAT TO DO IN CASE OF PROBLEM?
Please contact your customer service and join following information:
• Invoice number and serial number (the latest is to be found on the technical
plate on the device).
• If relevant, a picture of the damaged, broken or defective part.
• It will be easier for your customer service clerk to determinate the source of
the problem if you make a detailed and precise description of the matter. Avoid
formulations like "the device doesn´t heat", which may mean that it doesn´t heat
enough or even not at all. Though, those two possibilities have a different causati-
on!
• Still indicate the performance of the lights to facilitate the diagnosis: Is the light
of the ON/OFF switch on when the rocker switch is in ON position? Does the
orange light turn on when you set the temperature?
• Check with a thermometer that the device measures the temperature within
the cabin properly. (Caution; do not set the thermostat on a value exceeding the
maximal value of your thermometer!)
16
The more detailed your information, the quicker the customer service
will be able to answer your problem rapidly and efficiently!
!
CAUTION: Never open the device without the authorization of
your customer service. This can lead to a loss of warranty!
TROUBLESHOOTING
Problem
Temperature control is
set, the red power control
lamp is off, the heating
plate remains cold.
Temperature control is
set, the red power control
lamp is off, but the heating
plate is heated.
Temperature control is
set, the red power control
lamp flashes up, but the
heating plate is not
heating up.
Rev. 17.08.2017 Rev. 17.08.2017
Cause Solution
Power supply/lead is Contact our customer
defect service
Control lamp is defect Contact our customer
service
Heating element is Contact our customer
defect service
17