Installation - Wolf-Technik WTGD Serie Bedienungsanleitung

3. Installation

ENTLÜFTUNG
VENT
EIN
IN
ABLASS
DRAIN
Dimensions for in-/outlet configuration „SU"
Type Cartridges
03WTGD10 3x10" Ø72
03WTGD20 3x20" Ø72
03WTGD30 3x30" Ø72
03WTGD40 3x40" Ø72
05WTGD20 5x20" Ø72
05WTGD30 5x30" Ø72
05WTGD40 5x40" Ø72
08WTGD20 8x20" Ø72
08WTGD30 8x30" Ø72
08WTGD40 8x40" Ø72
12WTGD20 12x20" Ø72
12WTGD30 12x30" Ø72
12WTGD40 12x40" Ø72
The filter housing has to be installed in a standing
position, so that the pipe connections for inlet and
outlet are located horizontal and the cover with the
ring nuts is at the top. The upper connection is the
inlet, the lower connection is the outlet. The inlet line
has to be connected to the inlet, the outlet line to
the outlet. For tight sealing we recommend a PTFE
sealing tape or a sealing paste suitable for medium
and application. The versions with flanged connec-
tions have to be installed with a gasket suitable for
pressure temperature and medium.
For controlling and monitoring the filter pressure
drop for filter exchange it is recommended to install
AUS
OUT
Inlet/Outlet A B
DN40 160 225
DN40 160 225
DN40 160 225
A
DN40 160 225
DN50 185 265
DN50 185 265
DN50 185 265
DN65 210 300
DN65 210 300
DN65 210 300
DN100 250 325
DN100 250 325
DN100 250 325
pressure gauges and shut off valves in front of
and behind the filter housing. For draining the filter
housing the drain plugs can be replaced by suitable
ball valves. The vent plugs of the housing can also be
replaced by suitable ball valves.
Filter housings are delivered without filter elements!
The selection of the filter elements depends on the
application and a precise specification can not be
made in advance. The first equipment and exchange
of filter cartridges should only be made with filter
cartridges recommended by us, or with filter cart-
ridges suitable for medium, pressure, temperature
and application
ØD1
ØD2
C Ø D1 Ø D2
180 168 185
180 168 185
180 168 185
A
180 168 185
185 219 240
185 219 240
185 219 240
195 273 290
195 273 290
195 273 290
225 323 345
225 323 345
225 323 345
15
ØD2
A A
E F G
470 515 580
725 770 835
980 1025 1090
1235 1280 1345
730 780 865
985 1035 1120
1240 1290 1375
740 795 880
995 1050 1135
1250 1305 1390
795 875 960
1050 1130 1215
1305 1385 1470