Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before Use
Remove the water carbonator from the packaging. Keep packing materials away from
infants. There is danger of suffocation!
Clean all parts before using the first time as described below under „Cleaning".
Using
1.
Place the base on a solid, level surface. Take the valve head and
screw the CO
cartridge upright during screwing.
2.
Place the valve head on the base and observe well-fitting. The
water carbonator is ready for use.
3.
Enclosed you will find a pressure valve bottle cap that fits on all
common PET replacement bottles. Only use PET bottles that are
undamaged.
4.
Screw the pressure valve bottle cap on a full PET bottle. Never
use glass bottles.
5.
Put the sealed PET bottle on the water carbonator and press the
bottle down. CO
6.
Remove the bottle and shake it. Press at least three times the
PET bottle down to dissolve enough CO
7.
Try the water and decide according to your taste if the CO
tent is enough. If desired repeat carbonating.
Always store carbonated water in a cool place and consume carbon-
ated water within a day.
Cleaning
Clean the housing with a lightly moistened cloth. Use detergent as needed.
Never clean the water carbonator in a dishwasher. Dry all parts well.
Do not use aggressive chemicals or abrasives in order not to damage the surface.
Accessory
Pressure valve bottle cap, Set of 5, Article No. 27 38 39.
Suitable CO
steel cartridge, 372 ml, Art.-Nr. 28 33 25.
2
cartridge into the valve head. Always hold the CO
2
will stream into the PET bottle.
2
Using
into the water.
2
V
2
con-
2
Werbung
