A&D UA-767 Plus BT-Ci Bedienungsanleitung Seite 7

Symbols
Standby and power on.
Battery installation guide
Direct current
Type BF: Device, cuff and tubing are
designed to provide special protection
against electrical shocks.
The indicator that appears while
measurement is in progress. It blinks
when the pulse is detected.
Irregular Heartbeat indicator. (I.H.B.)
The indicator that appears when an
irregular heartbeat or any excessive
body movement is detected during the
measurement.
Previous measurements stored in
MEMORY.
The battery power indicator during the
Full Battery
measurement.
The indicator blinks when battery power
Low Battery
is low.
Unstable blood pressure due to
movement during the measurement.
The systolic and diastolic values are
within 10 mmHg of each other.
The pressure value did not increase
during inflation.
The cuff is not fastened correctly.
The pulse is not detected correctly.
PUL. DISPLAY ERROR
Pairing or unpairing has not been
performed correctly.
Pairing in progress
Unpairing in progress
Pairing or unpairing complete
Systolic blood pressure in mmHg
SYS
Diastolic blood pressure in mmHg.
DIA
Pulse per minute
PUL./min
EC directive medical device label
R&TTE directive transmitter module label
Manufacturer
EU-representative
EC REP
Symbols
Function / Meaning
English 5
Recommended Action
Measurement is in
progress. Remain as still as
possible.
Replace all batteries with
new ones, when the
indicator blinks.
Try the measurement
again. Remain very still
during the measurement.
Fasten the cuff correctly,
and try the measurement
again.
Remove and re-insert the
batteries. Try pairing or
unpairing again.