Maintenance; Disposal - Zipper Maschinen ZI-GHAS2800 Betriebsanleitung

15

MAINTENANCE

Vor Wartungsarbeiten Maschine ausschalten und den
Netzstecker ziehen!
Sachschäden und schwere Verletzungen durch unbe-
absichtigtes Einschalten der Maschine werden so ver-
mieden!
The machine is low maintenance and contains little parts that must undergo a maintenance
operator. Faults or defects that may affect the safety of the machine, must be rectified
immediately. Repairing work may only be performed by qualified personnel!
 Make sure that your machine and clean it regularly to get a long-lasting effectiveness and
efficiency.
 Keep the air vents clean and free of dust.
 Only use a warm damp cloth and a soft brush to clean your machine.
 Clean the machine. Never under water or even with high pressure.
 Do not use detergents or solvents as these could cause irreparable damage to your ma-
chine. Chemicals can damage the plastic parts.
 Check from time to time, the tightness of the mounting bolts on the undercarriage.
 To protect the chopper in storage for a long time against corrosion, handle the chopping
blade with something biodegradable oil.
 When the machine for maintenance, inspection or storage or for the replacement of acces-
sories is off, turn the engine off, unplug the power cord out and make sure that all moving
parts have come to a standstill. Let the machine cool down before you make any inspection,
adjustment, etc.
 The chopper can be packed into the container for storage and transport.
Follow the steps listed below:
 Store the machine in a dry place. Let the unit run for longer retention periods short dry.
Allow the engine to cool before you store it.
 If you wait for the chopper blade set, be aware about the fact that the knife can still be
moved by a manual start mechanism, although the engine will not start due to the locking
of the guard.
15.1

Disposal

Do not dispose the machine in residual waste. Contact your local authorities for infor-
mation regarding the available disposal options. When you buy at your local dealer for
a replacement unit, the latter is obliged to exchange your old.
Z.I.P.P.E.R Maschinen GmbH  www.Zipper-maschinen.at
ZI-GHAS2800
A C H T U N G
MAINTENANCE
Seite30