Inserting And Removing The Microsd Card - Mitel 620d Bedienungsanleitung

• All subscription and device data on the card is encrypted
and copy-protected. Commercially available
microSD-Cards are not recognised.
• Do not use the card with other devices (e.g. cameras) to
ensure that the card is not accidentally reformatted and
that sufficient storage space is available.
• The card can no longer be used with DECT phones if it has
been reformatted or data has been deleted.
INSERTING AND REMOVING THE MICROSD
CARD
The microSD card must be handled very carefully. The contacts
must be free of dust, moisture, grease, etc. Do not store the
card where it is hot (e.g. in direct sunlight). Do not bend the
card; bending may destroy the contacts.
1. Switch off the DECT phone.
2. Open the battery compartment and remove the battery.
3. Push the card holder downward and carefully angle the
cover slightly upward.
4. Place the card in the holder (with the contact surfaces
facing downward and the card cut-outs facing left).
Caution
Never touch the visible shiny gold contacts!
Electrostatic discharge may damage the
device.
User Guide
15