Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
User Manual
EN
FireWare Multi Gasdetector
Operation
The Practice Explosion Meter's gas values can be
changed with the H2S, CO, LEL and O2 dials and push
buttons.
The gas in question will be selected by pressing the
button. The values will be set by turning the button.
Pushing the 'pump' button on the right of the device will simulate a pump blockage. The pump in
the device will go into alarm mode if this button is pressed and 'off' appears on the screen. The
pump in the device can be reset if the button is pressed down again and 'on' appears on the screen.
5.
Switching off
The ON/OFF button should be used to switch off the remote control.
The ON/OFF button should be pressed to switch off the practice explosion meter.
www.FireWare.nl
ON
H S
CO
Pump
OFF
LEL
O
Press button to select gass
turn to change value
FireWare Mutli Gasdetector
Y/+
13
Werbung
Inhaltsverzeichnis
