Hafele FT 200 Betriebsanleitung Seite 52

Prerequisites:
1. Plug in the power plug.

Acoustic signal is heard. LED flashes green
for max. 5 seconds.
3. Remove programming key card.

LED flashes red for max. 5 seconds.
Recommendation: carry out a firmware update with the MDU 110 mobile
programming unit before starting up in order to ensure that the most up-to-date
DIALOCK firmware is on the terminal.
52
Tag-it ™ISO
Programming key card
5 s
5 s
Tag-it ™ISO
Clearing key card
x
2. Hold the programming key card in front of the
antenna during this 5-second period.

Acoustic signal is heard.
x
4. Hold the clearing key card in front of the
antenna during this 5-second period.

Acoustic signal is heard. LED illuminates
red.
System is in operation.