Conceptronic Lounge’n’LOOK CLLMLASERS Schnellinstallationsanleitung Seite 10

ENGLISH
3. Set-up the connection RF Channel between the
Mouse and the Receiver
This Conceptronic Laser Mouse is a plug-and-play device.
Normally, it's not necessary to setup the RF Channel. But if some
interference happens, then you must setup the connection RF
Channel.
1
1
Push
Push the channelreset button on the mouse. Then push the h th h
channel reset button on the receiver. If the cursor does NOT
move after 30 seconds, please follow the steps above.
l t b tt th
2
2
Push
P h th
GREEN LED FLASH (0.5 sec. Regularly)
GREEN LED FLASH (0.5 sec. Regularly)
Searching the channel
Se arc hing the c ha nnel
GREEN LED FLASH (if any action)
GREEN LED FLASH( if any action)
Channel connected
Cha nne l c onnec te d
GREEN LED ON GREEN LED ON
No a c tion
No action
10
h l t b tt