Control Devices - Atlantis A18-DSD06 Quickstart

step. If this is not the case, follow these steps: Open the device, push reset for 6 seconds. The
led is now rapidly flashing (at a rate of twice a second).
 Tuya app will show you the network that you are currently connected to, which is the same that
the Smart Wi-Fi Door/Window Sensor will connect to. Tap Change Network in order to select
another wireless network.
 Enter, if not already present, the wireless network access password
 Tap Next. The app wil try to connect your device.
 Tap Fast Flashing.
 Tap [ ] in order to change the device's name and room. A simple name will make voice control
easier with Alexa / Google Home. Tap Completed.

Control devices

 Touch My Home[
the account
 Touch the Smart Wi-Fi Door/Windos Sensor icon [
 The battery status is displayed in the upper left.
 Touch the [ ] icon at the top right to remove the device from the account or change its
name.
 Touch the [ ] icon at the bottom left to view the recorded logs [On indicates the contact
open / away, OFF indicates the contact closed ].
 Touch the [ ] icon at the bottom right to configure the notifications you want to receive.
 The first at the top activates the notification on closing.
 The middle one activates the low battery notification.
 The bottom one activates the notification on opening.

] then All Devices. The app will display all the devices connected to
You can remove the device by your account in one of the following 2 ways:
 (APP): My Home[
] then Remove Device and Confirm.
 (Smart Wi-Fi Door/Window Sensor): Open the device, push reset
for 6 seconds.
].
], tap on the device you want remove, tap [
3
ENG