Atlantis A18-DSD06 Quickstart Seite 2

After the start-up phase, the RED LED will start flashing twice a second. The device is ready to be
configured.
Use the included double-side adhesive tape to secure the main sensor onto the frame of the door
or window, align the small sensor with the main sensor and secure it with smaller adhesive tape.
You can aslo use the supplied screws to mount onto wooden door/window. (Note: the magnetic
sensor allows for up to 5/10mm gap).
Installing Tuya App on Apple/Android devices
 Download and install the Tuya application from the App Store or PlayStore on your
iPhone/iPad/Android. Touch the App Store/PlayStore icon, then Search for Tuya Smart. The
application is free.
 On your smartphone, tap the Settings icon, then Wi-Fi. Your smartphone will show you the
network that you are currently connected to, which is the same that the device will connect to.
 Launch the Tuya app.
 At the first start-up You need to create a new account (if this step has already been done, go
immediately to the section where the controlled outlet is added). Tap on Register and accept
the Privacy Policy, tapping on Agree.
 The system will identify automatically the country/region you are in, or you may choose to select
manually a country/region. Enter your email (mobile phone number) and tap Obtain
Verification Code.
 Enter the authentication code you received. Then enter the password and tap Completed to
complete registration.
 The Tuya app will display now the Home Page.
 Now we will add manualy a new device.
 Tap My Home[
 (Android) Tap Security & Sensors->Sensor (Wi-Fi) (Sensor). Please make sure the LED is
flashing rapidly (at a rate of twice a second) and then click the button to proceed to the next
 LED red flashing (at a rate of twice a second): lamp ready to be
configured.
 LED red flashing (once every 2 seconds): lamp ready to be configured
in AP mode.
], then +[ ].
2
ENG